Top 10 common forklift accidents ， forklift procedure need to pay attention to these issues ！.

Top 10 common forklift accidents ， forklift procedure need to pay attention to these issues ！.

Blog Article

Do not underestimate the forklift at work. If the procedure is bad, there will be significant mishaps in mins, and there are lots of mishaps entailing forklifts.

Case 1: The forklift freight blocked the vehicle driver's sight, and the individual in front can not be discovered, leading to a rolling mishap.
Case 2: In order to maintain the equilibrium of the forklift when lifting heavy items, the staff members utilized their body weight as the weight, which almost caused casualties.
Situation 3: The width of the forklift cargo surpasses the permitted width of the path and hangs on the roadside rack, which virtually triggers an mishap.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift motorist did not notice the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift lifts the personnel illegally, the forklift vehicle driver does not use the seat belt, the forklift lifter falls and the motorist is squashed when the forklift surrender.
Situation 7: The forklift driver did not use a seat belt and dropped from the automobile when it rolled over and was crushed.
Forklift operation should take notice of these issues ：.

Start.
1. Prior to starting, observe the environments, and after verifying that there are no challenges that hinder the security of driving, honk the horn first and after that start.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) scale have to be secure before starting.
3. When the forklift starts with a load, the vehicle driver needs to initially confirm that the load is steady and reputable.
4. The beginning needs to be slow-moving and steady.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast needs to be tilted backward. .
2. Do not raise the fork too expensive when driving. When going into and leaving the task site or while driving, beware that there will certainly be no obstacles in the sky. When the lots is taking a trip, the fork must not be raised expensive, which will certainly affect the security of the forklift. .
3. After discharging, the fork must be decreased to the normal driving position prior to driving. .
4. When transforming, if there are pedestrians or automobiles nearby, the driving signal ought to be provided initially. High-speed sharp turns are banned. High-speed doglegs will create the automobile to lose side security and tip over. .
5. When the forklift is downhill, it is strictly restricted to switch off the flame and slide, and it is prohibited to brake instantly while driving with tons unless there are special circumstances.
6. When the forklift is running, it should follow the web traffic rules in the manufacturing facility and have to maintain a certain safety range from the car ahead. .
7. When the forklift is running, the tons has to be in the most affordable setting that does not impede the driving, and the gantry must be correctly tilted back. The load shall not be increased except when stacking or loading. .
8. The elevation of the lots should not block the vehicle driver's sight. In unique circumstances, when the item affects the forward vision, drive at a reduced rate when turning around.
9. It is forbidden to activate the ramp, nor to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the factory area is 5 km/h, and it should drive safely at a reduced speed when entering the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for workers to stand on the fork to hold products and play a stabilizing duty. .
12. If problems are discovered, they will certainly be repaired and reported in a prompt manner, and they will never operate with illnesses or conceal them.

filling and discharging.
1. When fork-loading things, the range between the two forks ought to be changed as required to make the tons of both forks balanced and not skewed, and one side of the item ought to be against the rack. .
2. It is forbidden to deal with a single fork or utilize a fork top or pull. In special conditions, security indication need to be set up to advise surrounding pedestrians. .
3. In the process of packing and dumping products, the forklift should be stopped with the brake. .
4. The speed of the car ought to be slow and steady. Take care not to roll the wheels on the dunnage, so as not to extend the rolled objects and hurt individuals. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the load, and it needs to be kept in mind that the fork tip ought to not touch various other items or things. The lots should be stabilized with marginal back tilt of the gantry so that the load does not slide backwards. The mast can be tilted forward a little when the tons is reduced to allow for easy positioning of the lots and removal of the forks. .
6. It is forbidden to fork items at high speed and ram difficult items with the fork head. .
7. When Stand-on Electric Pallet Stacker the forklift is working, it is prohibited for people to stand around the fork, so as to stay clear of the collapse of the goods and hurt people. .
8. Overwhelming is prohibited, and it is restricted to utilize forks to lift employees to engage in high-altitude procedures to stay clear of high-altitude falling crashes. .
9. It is not allowed to utilize the brake inertia to slide, place, round or roll items. .
10. It is not permitted to make use of forks to pick, transform pallet unload.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you must discharge the goods or reduced the fork structure.
2. Draw the emergency brake manage to dead or dispirit the hand brake button.
3. The engine is turned off and the power is Stand-on Electric Pallet Stacker cut off. (Except for unique circumstances, such as the chauffeur does not leave the car's line of vision and does not surpass 1 min).
4. Get rid of the key. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look must be inspected, and fuel, lubing oil and air conditioning water ought to be added.
2. Examine the security performance of beginning, running and braking.
3. Check whether the lights and horn signals are full and efficient.
4. During the procedure of the forklift, inspect whether the pressure and temperature level are normal.
5. After the forklift is running, the exterior leak ought to also be checked and the seals need to be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine before leaving the vehicle;.
2. When you experience someone in front of you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The turning should not be too sharp to avoid the tendency of " totally free switching";.
6. Adding and down the slope should be slow and consistent, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the slope is above 10%, the car should be driven in reverse when worsening;.
8. When the forklift personnel bring the goods and move forward, if they come across huge or hefty items and most likely to the vehicle driver's line of sight, they should take the turning around exercise
.
The "Eight Prohibitions" need to be followed in the operation.
1. Solitary fork procedure is not allowed.
2. It is not permitted to raise the goods for long distance driving.
3. It is not permitted to pick up the goods by turning over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not permitted to make use of inertia pressure to get the goods.
6. It is not allowed to use braking force to exile round or easy-to-roll things.
7. It is not enabled to bring people to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is elevated.
8. Do not drive side to side on slopes
.
Parking is not permitted under the following conditions.
1. Curves, narrow roadways, railway crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the exact same length as the challenge ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844